☎ +359 3751 7477
+359 898 696546
Menu
Angle cutting circular
The machine is used for cross-cutting of wood laths to different lengths and different angles.
Technical data
| Maximum length of input material | 2,5м |
| Minimum length of input material | 500мм |
| Maximum section of material | 100 х 60 мм |
| Мinimum section of material | 20 х 20 мм |
| Turning angle of the circular saw in two each other perpendicular planes | ± 46° for both |
| Servo control - three axеs: | |
| - two angle axеs | |
| - one linear axis | |
| Specialized controller to control and display for entering information | |
| Software | |
| Input conveyor | 2,5м. |
| Pneumatic pressing and cutting | |
| Productivity: | min – 7 sec /cut. |
| max – 4 sec / cut. | |
| Supplying the boards at the entrance | manually |
| Diameter of circular saw | 350÷400мм. |
| Installed power | 9,6 kW |